Chicagoland & Northwest Indiana's Handicap Accessibility Equipment Dealer

Ramps

 

EZ-ACCESS® MODULAR RAMPS


Designed to address the accessibility needs of the residential market, the EZ-ACCESS Modular Ramp system is an excellent choice when accessibility needs extend beyond the scope of a portable ramp. The efficient design uses less hardware and no pre-assembly is required.

EZ-ACCESS Modular Ramps offer quick and convenient installation and removal.

Made in the USA.

 

 

PATHWAY® LITE Advantage Series® RAMP

Available in 2, 3, 4, 5, 6, 7 & 8 foot lengths

PATHWAY Lite is a secure solution for temporary or semi-permanent home access. The ramp features a solid, seamless design, making it ideal for use with scooters, wheelchairs, and walkers. This ultra-strong ramp provides the safety and strength required while remaining light and portable. No assembly or folding required. Applied skid-resistant surface and a self-adjusting bottom transition plate for easy conversion from ramp to ground. Manufactured from aircraft-grade aluminum.600 lb weight capacity.

 

SPECIFICATIONS PATHWAYLT AS2 PATHWAYLT AS3 PATHWAYLT AS4 PATHWAYLT AS5
Made of aluminum
Non-skid surface
Usable size (L x W x H) 2′ x 32″ 3′ x 32″ 4′ x 32″ 5′ x 32″
Weight (lbs.) 12 18 22 28
Weight capacity (lbs.) 600 600 600 600
Outside width 32½” 32½” 32½” 32½”

 

SPECIFICATIONS PATHWAYLT AS2 PATHWAYLT AS3 PATHWAYLT AS4
Made of aluminum
Non-skid surface
Usable size (L x W x H) 6′ x 32″ 7′ x 32″ 8′ x 32″
Weight (lbs.) 32 37 42
Weight capacity (lbs.) 600 600 600
Outside width 32½” 32½” 32½”

*Weights are approximate and may vary.

** Consult your equipment’s owner guide for proper degree of incline. Never exceed its recommendations.

 

 

PATHWAY® RAMP Classic Series

Available in 4, 6, 8, & 10 foot lengths

Featuring a seamless non-skid driving surface, the PATHWAY ramp is a safe, secure and ideal for scooters, walkers wheelchairs, canes, and crutches. Heavy duty and extra wide, this 36″ ramp features an 850-pound weight capacity and easily accommodates wider chairs.

Extruded aluminum handrails (optional) give a clean and modern appearance that will coordinate with any home. This lightweight ramp is ideal for temporary or semi-permanent home access.

Additional widths and lengths available.

 

SPECIFICATIONS
without handrails
PATHWAY CS4 PATHWAY CS6 PATHWAY CS8 PATHWAY CS10
Made of aluminum
Non-skid surface
Usable size (L x W x H) 4′ x 36″ 6′ x 36″ 8′ x 36″ 10′ x 36″
Ramp weight (lbs.)* 45 60 75 90
Weight Capacity (lbs.) 850 850 850 850
Outside width 37″ 37″ 37″ 37″

 

SPECIFICATIONS
without handrails
PATHWAY CSHR4 PATHWAY CSHR6 PATHWAY CSHR8 PATHWAY CSHR10
Made of aluminum
Non-skid surface
Usable size (L x W x H) 4′ x 36″ x 35¾” 6′ x 36″ x 35¾” 8′ x 36″ x 35¾” 10′ x 36″ x 35¾”
Ramp weight (lbs.)* 70 85 105 130
Weight capacity (lbs.) 850 850 850 850
Outside width 40¼” 40¼” 40¼” 40¼”

*Weights are approximate and may vary.

** Consult your equipment’s owner guide for proper degree of incline. Never exceed its recommendations.

 

 

RUBBER CARGO WEDGE

The rubber CARGO WEDGE is the ideal solution when recessed cargo areas leave you in a rut. Without altering the vehicle, the CARGO WEDGE compensates for the difference between the rear door threshold and the lower-level cargo area, allowing mobility equipment to be loaded/unloaded with a smooth transition.

The CARGO WEDGE, when used in conjunction with the SUITCASE® or TRIFOLD Advantage Series® Ramp, or SUITCASE® Signature Series® Ramp, provides the perfect transport system for mobility access. Slip-resistant and made of 100% recycled tires.

SPECIFICATIONS THR 250-1
Made of 100 % recycled rubber
Non-skid surface
Usable size (L x W x H) 2½” x 24″ x 48″
Weight (lbs)* 40
Weight capacity (lbs.) 850
For wheelchairs & scooters
Usage guidelines** 2½” rise

*Weights are approximate and may vary.

** Consult your equipment’s owner guide for proper degree of incline. Never exceed its recommendations.

 

 

RUBBER THRESHOLD RAMP WITH BEVELED SIDES

Slip resistant and made entirely of recycled tires. The EZ-ACCESS Rubber Threshold ramp is ideal for indoor or outdoor use and provides a safe and smooth ground-to-sill transition. It is especially practical for sliding glass doors because it does not interfere with the door track. Usable width is 36″ (40″ and 43″ overall including bevels) with a maximum height of 1½ and 2½.”

 

SPECIFICATIONS THRBE 150-1 THRBE 250-1
Made of 100 % recycled rubber
Non-skid surface
Usable size (H x L x W) 1½” x 14″ x 36″ 2½” x 25″ x 36″
Overall size (H x L x W) 1½” x 14″ x 40″ 2½” x 25″ x 43″
Weight (lbs.)* 14 40
Weight capacity (lbs.) 850 850
For wheelchairs & scooters
Usage guidelines** 1½” rise 2½” rise

*Weights are approximate and may vary.

** Consult your equipment’s owner guide for proper degree of incline. Never exceed its recommendations.

 

 

RUBBER THRESHOLD RAMP

Simply place against the door threshold (inside or outside) to provide a smooth ground-to-sill transition. Standard width is 48″ (for wider entrances, place 2 ramps side-by-side). Ramp can easily be trimmed for lower heights and widths, or combined to reach greater heights.

EZ-ACCESS Rubber Threshold ramps are slip-resistant and designed for years of continued use.

Made of 100% recycled tires.

SPECIFICATIONS THR 250-1 THR RISER 225-1 PR
Made of 100 % recycled rubber
Non-skid surface
Usable size (H x L x W) 2½” x 24″ x 48″ 24″ x 24″ (two each)
Overall size (H x L x W) 2½” x 24″ x 48″ 24″ x 24″ (two each)
Weight (lbs.)* 40 23½ per riser (2 each)
Weight capacity (lbs.) 850 850
Usage guidelines ** 2½” ***Call customer service
for details
For wheelchairs & scooters

*Weights are approximate and may vary.

** Consult your equipment’s owner guide for proper degree of incline. Never exceed its recommendations.

***Optional components available to reach heights greater than 2.5.”

 

 

 

SUITCASE® RAMP Advantage Series®

Available in 2, 3, 4, 5, & 6 foot lengths

Advantage Series ramp, with its single fold design, offers a simple and convenient solution for wheelchairs and scooters to access steps, vehicles, and raised landings with ease. This ultra-strong ramp provides the safety and strength required while remaining light and portable.

The ramp can be separated, making it even easier to use, carry, and store. By simply removing two hinge pins, the SUITCASE Advantage Series ramp quickly separates into two lightweight sections, each with their own carrying handle.

Ramp features high-quality skid-resistant tape with yellow safety strips and a self-adjusting bottom transition plate for easy conversion from ramp to ground. Unfolds to a 29″ wide platform.

 

SPECIFICATIONS SUITCASE AS2 SUITCASE AS3 SUITCASE AS4 SUITCASE AS5 SUITCASE AS6
Made of aluminum
Non-skid surface
Built-in carrying handle
Usable size 2′x29½” 3′x29½” 4′x29½” 5′x29½” 6′x29½”
Folded size
(L x W x H)
24″x15″x4½” 36″x15″x4½” 48″x15x4½” 60″x15″x4½” 72″x15″x4½”
Weight (lbs.)* 6 ea.
(2 sections)
8 ea.
(2 sections)
10 ea.
(2 sections)
13 ea.
(2 sections)
15 ea.
(2 sections)
Weight capacity (lbs.) 800 800 800 800 800
For wheelchairs & scooters
Usage guidelines** Curbs, 1 step Curbs, 1 step Curbs, 1-2 steps Curbs,
1-2 steps,
some minivans
1-3 steps, some minivans & SUVs

*Weights are approximate and may vary.

** Consult your equipment’s owner guide for proper degree of incline. Never exceed its recommendations.

 

 

 

THRESHOLD RAMPS

Available in 1, 1.5, 2, 3, 4, 5, & 6 inch heights

The EZ-ACCESS Threshold ramp is a lightweight yet durable free-standing modular ramp designed for doorways, sliding glass doors, and raised landings. This seam-free ramp is 34″ wide and easily accommodates thresholds from ¾” to 6″ high. Ideal for use with wheelchairs, walkers, and cane users. Made of anodized aluminum and is intended for indoor or outdoor use.

 

 

SPECIFICATIONS THRESH 1 THRESH 1.5 THRESH 2 THRESH 3
Made of aluminum
Non-skid surface
Modular design
Usable size (H x L x W) 1″x 6½”x34″ 1½”x 9½”x34″ 2″x12″x34″ 3″x17″x34″
Weight (lbs.)* 3 5 8
Weight capacity (lbs.) 600 600 600 600
For wheelchairs &
scooters
Usage guidelines** ¾” – 1¼” rise 1¼” – 1¾” rise 1¾” – 2¼” rise 2¾” – 3¼” rise

 

SPECIFICATIONS THRESH 4 THRESH 5 THRESH 6
Made of aluminum
Non-skid surface
Modular design
Usable size (H x L x W) 4″x22¼”x34″ 5″x27½”x34″ 6″x32¾”x34″
Weight (lbs.) * 11 15 20
Weight capacity (lbs.) 600 600 600
For wheelchairs & scooters
Usage guidelines** 3¾” – 4¼” rise 4¾” – 5¼” rise 5¾” – 6¼” rise

*Weights are approximate and may vary.

** Consult your equipment’s owner guide for proper degree of incline. Never exceed its recommendations.

 

 

TLE- Optional Top Lip Extension


Increase the usefulness of your SUITCASE® or TRIFOLD® Advantage Series® or SUITCASE® Signature Series® ramp with the Top Lip Extension (TLE). This optional extension increases the standard 3″ lip to become 9″, allowing the ramp to clear the rear bumper of SUVs and vans. Easily attaches to standard lip.

Patent pending.

 

SPECIFICATIONS
Made of aluminum
Non-skid surface
Useable size 8½” x 13⅞” x 2⅜”
Weight (lbs.) 5 per set
Weight capacity (lbs.) 500
For Wheelchairs & Scooters

*Weights are approximate and may vary.

** Consult your equipment’s owner guide for proper degree of incline. Never exceed its recommendations.

 

 

 

TRIFOLD® RAMP Advantage Series®

Available in 5, 6, 7, 8, & 10 foot lengths.The TRIFOLD Advantage Series portable wheelchair ramp, with its unique 3-fold design, offers the length required for wheelchairs and scooters to easily access steps, vehicles, and raised landings. The ramp is designed to be used and carried as a set, or if desired, can be quickly separated into two individual sections, making it even easier to use, carry, and store. By simply removing two hinge pins, the TRIFOLD Advantage Series ramp quickly separates into two lightweight halves, each with their own carrying handle.

The durable, patent-pending hinge with interlocking brackets provides smoother operation and reduced pinch points. The portable ramp features high-quality skid-resistant tape with yellow safety strips and a self-adjusting bottom transition plate for easy conversion from ramp to ground. Unfolds to a 29″ wide platform. Manufactured of welded aircraft-grade aluminum. Features an 800 pound weight capacity and three-year limited warranty.

 

 

SPECIFICATIONS TRIFOLD
AS5
TRIFOLD
AS6
TRIFOLD
AS7
TRIFOLD
AS8
TRIFOLD
AS10
Made of aluminum
Non-skid surface
Built-in carrying handle
Usable size 5′x29½” 6′x29½” 7′x29½” 8′x29½” 10′x29½”
Folded size (L x W x H) 30¾”x15″x11½” 36¾”x15″x11½” 42¾x15″x11½” 48¾x15″x11½” 60¾”x15″x11½”
Weight (lbs.)* 16 ea.
(2 sections)
19 ea.
(2 sections)
22 ea.
(2 sections)
25 ea.
(2 sections)
30 ea.
(2 sections)
Weight capacity (lbs.) 800 800 800 800 800
For  wheelchairs & scooters
Usage guidelines** Curbs, 1-2 steps, some minivans 1-3 steps, minivans, some vans & SUVs 1-3 steps, minivans,  some vans & SUVs 2-3 steps, minivans, some vans & SUVs 2-4 steps, minivans,
some vans & SUVs

*Weights are approximate and may vary.

** Consult your equipment’s owner guide for proper degree of incline. Never exceed its recommendations.